Original Electronic Cigarette Aspire Dynamo Vape Kit with 4ml Nepho Tank Vaporizer 220W Mod 2 inch TFT Screen pk X-PRIV Kit

Original Electronic Cigarette Aspire Dynamo Vape Kit with 4ml Nepho Tank Vaporizer 220W Mod 2 inch TFT Screen pk X-PRIV Kit

CLEARANCE SALE

Save US $19.98


  • Vendoraspire Official Store
  • Original PriceUS $99.88piece
  • SaveUS $19.98piece20% off
  • Last PriceUS $79.90piece
  • ShippingFree shipping
  • Product Rating5.0(2)






Electronic Cigarettes Aspire Dynamo Vape Kit 220W High Power 2 inch TFT Screen 4ml Tank Support VW VV Bypass CPS TC TCR Modes add gift

Aspire now brings you yet another kit with awesome flexibility and lots of power. Introducing the new Aspire 220 watt Dynamo kit. It allows for use with three different battery types, 18650, 20700 or 21700. The Dynamo can also be used in various modes, allowing you to easily select between Wattage, Voltage, Bypass, CPS (C1/C2/C3), TC(Ni/Ti/SS316L) and TCR(M1/M2/M3). It comes in five super colors Dark Grey, Red with Black, Rainbow, Purple, and Camo with Black, all have the new Nepho tank in complimentary colors.


Clink here to get , and

Even though the is a dual battery mod, it is still quite ergonomic and comfortable to hold thanks to its rounded sides and corners. With an output wattage of up to 220 watts regardless of which type of battery is used, 18650, 20700 or 21700

Size: 137* 49* 34mm

Battery: dual 21700/20700/18650 cells (not included)

Output: Max 220W
Screen: 0.2 inch TFT colorful display
Temperature Range: 200°--600°/100°--315°
Thread: Spring-loaded 510 connector
Capacity: 4ml
Coil: 0.5ohm KA coil/0.15ohm Mesh coil

The new press fit Nepho coils supplied with the Nepho Tank come in two types with two resistances. The first, a 0.5ohm Kanthal wire coil and Aspires all new mesh coil rated at 0.15 ohms, again made with Kanthal wire. Both have excellent wicking properties due to the large wicking ports.

Nepho coil Installation

Coil installation couldn’t be easier, simply unscrew the base hardware, pull out the used coil, replace it with a new one (it just drops in) and screw the base hardware back to the tank. The new Nepho coils are now press fit so are much less messy to handle when replacing.

On the Nepho tank, aspire have introduced a simpler system for filling, incorporating a safer child lock mechasnism.Pull up the top cap,place your thumb on the top cap right above the triangle symbol and push the top cap away until the filling hole is revealed.Then add your prefered e-liquid into the tank through the filling hole,push the top cap back into place and push the top cap down to lock.

Note:As usual when using a new atomizer,let the tank stand for 5 minutes after filling so the cotton can be saturated with e liquid before use.

Do not let the tank becom completely empty.Refill the tank to avoid dry buring or damage to the atomizer

The triple slot airflow is easy to adjust to your own vaping style and preference. The Nepho tank enusres great flavor at all setting with a wide bore deirin drip tip ensuring comfort.The large wicking ports in both the standard coil and the new mesh coil makes sure the tank\'breathes\' easilt with little chance of try hits and satureated delicious flavor,especially with the mesh coil

Battery Installation

Turn off the MOD and remove tank. Pull the lock catch to allow the battery door to open. When replacing the batteries, please pay attention to the correct positive and negative connections. Then insert the battery of your choice, 18650 (use the supplied silicon adapter), 20700 or 21700. Insert the batteries as seen in the diagram and close the battery door, ensuring the door catch is securely fastened.

Mod screen, settings, and modes

The very clear, large circular screen and interface allows access to adjust the values of different output modes,data,system, them and about.Simple to navigate and easy to see.

Watch UI

Press fire button to enter. When you are in “Time Set”press fire button to choose the value you want to adjust, press up or down button to change the values and turn on or off the watch. Enter Watch UI to choose your preferred watch UI displayed on your mod, we’ve created 11 different types of Watch UI to expand your choices.

The Dynamo kit comes with all the safety features that Aspire is famous for.

Charging the mod via Micro-USB charging port, the charging current can reach up to 2A . When connecting the mod to the charger, the screen will display two growing battery icons with the 2 circular rings around the screen edge showing a rotary movement when charging. The screen also displays the battery percentage, charge time and charge current. Once the battery level reaches 4.2V or when it’s fully charged, the mod will stop charging the screen will shut off.

The mod will not charge when the batteries are incorrectly installed or when there’s only one battery installed. The batteries cannot be replaced while charging, please unplug the charging cable before changing the batteries.

1* Dynamo mod

1* Nepho Tank

1* Glass tube

8* O-rings

2* Coils (1*0.5Ω & 1*0.15Ω Mesh Coil)

1* USB Cable

1* Warning card

1* User manual

1* Warranty card

1* Dual 18650 battery adapter